Substances and articles of Class 4.3 are subdivided as follows: which answer is NOT correct:
WF1 Substances which, in contact with water, emit flammable gases, liquid, flammable;
WS Substances which, in contact with water, emit flammable gases, solid, self-heating;
WF2 Substances which, in contact with water, emit flammable gases, solid, flammable;
SW Substances liable to spontaneous combustion, which, in contact with water, emit flammable gases
None
The Limited quantity of ETHYL BROMIDE is
For a package containing Barium Bromate, the following ADR labels are required
If no tunnel restriction applies, this is indicated by:
The Limited Quantity designation has the following characteristics: 1. Has the shape of a square standing on one of its vertices (diamond-shaped). 2. The top and bottom portions and the surrounding line should be black. 3. The center area should be white or a suitable contrasting background. 4. The minimum dimensions must be 100 mm x 100 mm and the minimum thickness of the line forming the diamond must be 12 mm. Which characteristics are correct.
After the proper shipping name, where the classification and/or conditions of carriage of the substance or object may differ under certain circumstances, a descriptive text in lower case letters is added to clarify the scope of the classification.
Special provision 48 states that the substance is not permitted for carriage if it contains more than 20% hydrogen cyanide.
The packaging for UN No. 1791, packing group II, shall be fitted with a venting device.
What is flammable during the assimilation of Formaldehyde standard liquid, solution?
Special provision 60 indicates that 'If the concentration is higher than 72%, this substance is not permitted for carriage.'
A transport unit transports (by boat) an uncleaned empty tank, originating from Ireland, to a cleaning company in Germany. The transport unit only carries the 2 orange plates, the marking and labeling of the tank are in accordance with 5.3 IMDG Code. Is this carrier in violation?
Nitrocellulose meeting the descriptions of UN No. 2556 or 2557 may be assigned to Class 4.2.
Ammonium nitrate is transported in a tanker with 8,000 liters. Is a security plan required?
The substance COPPER CHLORATE has a packaging group:
To which UN number does packing instruction P410 apply:
What is the tunnel code of ISOPROPYL CHLOROACETATE?
A Spanish driver transports a shipment of dangerous goods from Spain to the Netherlands. In which language(s) is the consignment note expected to be written (ADR data):
When the fumigated loading unit has been ventilated and unloaded, the warning sign for fumigated cargo must remain in place.
Statement 1: The temperature of the water bath and the duration of the test of aerosol cans shall be such that the internal pressure reaches a value that would be achieved at 55 °C (50 °C if the liquid phase constitutes 95% of the contents of the aerosol can, gas cartridge or fuel cell cartridge at 50 °C). Statement 2: If the contents are sensitive to heat or if the aerosol cans, gas cartridges or fuel cell cartridges are made of a plastic material that softens at this test temperature, the temperature of the bath should be set at 20 °C to 30 °C but in addition one in 2000 aerosol cans, gas cartridges or fuel cell cartridges are tested at the higher temperature.
The date of manufacture of a plastic inner container may alternatively be marked on the underside immediately next to the other markings. In that case, the four digits of the year in the mark and in the inner circle of the clock must be identical.
